D211:
D212:
First value is set!
DS1 CIRCUIT PACK B.211 port: 1a10 - towards B.212
Location: 1A10
Name: IB.211.DS1
Bit Rate: 2.048, 1544
Line Coding: hdb3
Signaling Mode: isdn-pri, CAS, common-chan, isdn-ext, robbed-bit
Connect: pbx, line-side, network, host
IF connect=pbx
Interface: network, peer-master, peer-slave, user
IF interface=network-user
Country Protocol: 8, 1..23,(etsi)
IF interface=peer-peer
Peer Protocol: Q-SIG
Channel numbering: timeslot, sequented
Interworking message: Alerting, Progress,
Protocol Version: a, b, c
Interface Companding: alaw
CRC?: y
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1 kHz, speech
MAINTENANCE PARAMETERS
Slip Detection? y
Near-end CSU type: other, integrated
-------------------------------------------------------------------------
To do: Interface: network-user -> peer-master - peer-slave (ECMA)
Print X.208 and X.209
Admin: busyout tr 4
busyout board 1a10
ch ds1 1a10 (if cas -> isdn pri circuits down)
release bd 1a10
release tr 4
-------------------------------------------------------------------------
DS1 CIRCUIT PACK B.211 port: 1a11 - B.214 felé
Location: 01A11 Name: test-1
Bit Rate: 2.048 Line Coding: hdb3
Signaling Mode: isdn-pri
Connect: host, line-side, network,
Country Protocol: 8
Interworking message: Progress
Protocol Version: a
Interface Companding: alaw
CRC?: y
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1 kHz
MAINTENANCE PARAMETERS
Slip Detection? y
Near-end CSU type: other, integrated
-------------------------------------------------------------------------
DS1 CIRCUIT PACK 1a12 IVR
Location: 01A11 Name: test-1
Bit Rate: 2.048 Line Coding: hdb3
Signaling Mode: CAS
Interconnect: pbx
Country Protocol: 1
Interworking message: Progress
Protocol Version: a
Interface Companding: mulaw station: DS1FD 01A1201..30 IVR,1..30
CRC?: y
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1 kHz
MAINTENANCE PARAMETERS
Slip Detection? y
Near-end CSU type: other, integrated
-------------------------------------------------------------------------
DS1 CIRCUIT PACK B.211 port: 1a12 - gergo fele
Location: 01A12 Name: test-1
Bit Rate: 2.048 Line Coding: hdb3
Signaling Mode: isdn-pri
Connect: host, line-side, network,
Country Protocol: 8
Interworking message: Progress
Protocol Version: a
Interface Companding: alaw
CRC?: y
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1 kHz
MAINTENANCE PARAMETERS
Slip Detection? y
Near-end CSU type: other, integrated
-------------------------------------------------------------------------
Connect:
pbx, - connection to the other pbx
(interface field)
line-side, - ???
network, - connection to the public network switch
(country-specific protocol)
host - connettion to the computer
(The network is the computer.)