Routing programs: AAR - Automatic Alternate Routing - it redirects the call automatically to another route, if it becomes inoperative (it uses usually the private dialing plan). ARS - Automatic Route Selection - in case of charged (toll) calls service automatically selects the route with the smallest cost (it uses usually the public network dialing plan). Time of Day (TOD) Routing.
Digit Analysis:
We will program to this table, what routes (trunks) we assign to the outer dialing number ranges.
Command: Ch AAR ANAL 2
| Parameter | Description | Range of possible values | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dialed String | Input of the table: (Partial string used for the route selection (Destination Code)) In case of UDP a "Location cod" (virtual destination code) assigned to the dialing numbers | max 18 karakter 0..9 és * wildcard: x vagy X) | |||||||||||||||||||||
| Total Mn | The minimal amount of numbers necessary for the analysis | Default:7 (AAR=UDP+PNA) | |||||||||||||||||||||
| Total Mx | The maximal amout of number necessary for the analysis | Default:7 Max:28 | |||||||||||||||||||||
| Rte Pat - Route Pattern | Kimenet: Output: Identifier of the selected route pattern table | ||||||||||||||||||||||
| Call Type | Output: Setting of attributes of the dialing number forwarded on the selected route | Values in case of AAR:
| |||||||||||||||||||||
| Nd Num (it is not used in the test network) Serial number of the target node (in case of DCS and node routing)
| ANI Rq | (it is not used in the test network) Automatic Number Idendification (only in case of R2-MFC calls) | Default: n
| |
