TAVKMER / Definity

Definity - Route Pattern - Tables describing routes

In these tables we can specify the trunks for the route selected in the routing table. Many trunks (altenative paths) can be assigned to a route. Moreover many attributes of the selected route can be set here.

List of the selectable routes:

Command: LIST ROUT , BCM 50 equivalent

Parameter Desription Set of the possible values
Route Pat Input: Identifier of the table describing the selected route.
It is the output of the AAR table.
_Pref _{It is not necessary for the AAR}
Trk Grp - Trunk Group No. Output: Identifier of the trunk realizing the primary route.
FRL Routing preference 0..7 0-min, 7-max restriction
Hop Lmt - Hop limit Maximum number of links of the route 1..32, if it is not filled out, then there is no limit
_{IXC - Inter Exchange Carrier (US)} _{CDR - ARS can also route on the basis of this (see also Wikipedia)}
BCC Bearer Capability Class
What kind of information-transmitting capabilities does the route have? Values
TSC Temporary Signalling Connections
ISDN TSC Gateway Channel Assignments y - it permits both the operation of CA és NCA DSS1 TSC protocols (the packet-switched data transmission) on the route.
CA-TSC request Call Associated TSC
A connection request between Channel B and CA-TSC

as needed - CA-TSC
at-setup - simultaneously
none - it could not be simultaneous

ITC Information Transfer Capability
We can set the type of the traffic to be forwarded.

restricted
unrestricted
both

Service/Feature only in the case of Call by Call Service (US)

Parameter	Desription	Set of the possible values
Route Pat	Input: Identifier of the table describing the selected route. It is the output of the AAR table.
_Pref	_{It is not necessary for the AAR}
Trk Grp - Trunk Group No.	Output: Identifier of the trunk realizing the primary route.
FRL	Routing preference	0..7 0-min, 7-max restriction
Hop Lmt - Hop limit	Maximum number of links of the route	1..32, if it is not filled out, then there is no limit
_{IXC - Inter Exchange Carrier (US)}	_{CDR - ARS can also route on the basis of this (see also Wikipedia)}
BCC	Bearer Capability Class What kind of information-transmitting capabilities does the route have?	Values
TSC	Temporary Signalling Connections ISDN TSC Gateway Channel Assignments	y - it permits both the operation of CA és NCA DSS1 TSC protocols (the packet-switched data transmission) on the route.
CA-TSC request	Call Associated TSC A connection request between Channel B and CA-TSC	as needed - CA-TSC at-setup - simultaneously none - it could not be simultaneous
ITC	Information Transfer Capability We can set the type of the traffic to be forwarded.	restricted unrestricted both
Service/Feature	only in the case of Call by Call Service (US)

Data block of a route:

Command: ch rout x;

Parameter Desription Set of the possible values
Grp. No. Output: identifier of trunks realizing routes
FRL Routing preference 0..7 0-min, 7-max restriction
NPA It is not necessary for the AAR
Pfx Mrk (Pref) It is not necessary for the AAR
Hop Lmt - Hop limit Maximum number of links of the route 1..32, if it is not filled in, there is no limit
_{Toll List} _{It is not necessary for the AAR}
No. Del Digits
Inserted Digits
_{IXC - Inter Exchange Carrier (US)} _{CDR - ARS can also route on the basis of this (see also Wikipedia)}
BCC Bearer Capability Class
What kind of information-transmitting capabilities does the route have? Values
TSC Temporary Signalling Connections
ISDN TSC Gateway Channel Assignments y - it permits both the operation of CA and NCA DSS1 TSC protocols (the packet-switched data transmission) on the route.
CA-TSC request Call Associated TSC
A connection request between Channel B and CA-TSC

as needed - CA-TSC
at-setup - simultaneously
none - it could not be simultaneous

ITC Information Transfer Capability
We can set the type of the traffic to be forwarded.

restricted
unrestricted
both

BCIE - Bearer Capability Information Element We can set here the definition of BC-ITC element, if ITC=both.

ept - endpoint (default)
both

Service/Feature only in the case of Call by Call Service (US)

Parameter	Desription	Set of the possible values
Grp. No.	Output: identifier of trunks realizing routes
FRL	Routing preference	0..7 0-min, 7-max restriction
NPA	It is not necessary for the AAR
Pfx Mrk (Pref)	It is not necessary for the AAR
Hop Lmt - Hop limit	Maximum number of links of the route	1..32, if it is not filled in, there is no limit
_{Toll List}	_{It is not necessary for the AAR}
No. Del Digits
Inserted Digits
_{IXC - Inter Exchange Carrier (US)}	_{CDR - ARS can also route on the basis of this (see also Wikipedia)}
BCC	Bearer Capability Class What kind of information-transmitting capabilities does the route have?	Values
TSC	Temporary Signalling Connections ISDN TSC Gateway Channel Assignments	y - it permits both the operation of CA and NCA DSS1 TSC protocols (the packet-switched data transmission) on the route.
CA-TSC request	Call Associated TSC A connection request between Channel B and CA-TSC	as needed - CA-TSC at-setup - simultaneously none - it could not be simultaneous
ITC	Information Transfer Capability We can set the type of the traffic to be forwarded.	restricted unrestricted both
BCIE - Bearer Capability Information Element	We can set here the definition of BC-ITC element, if ITC=both.	ept - endpoint (default) both
Service/Feature	only in the case of Call by Call Service (US)

Numbering FormatAttributes of the outgoing dialing number can be set here.

Numbering Format NPID Type of Number
blank unmodified unmodified
natl-pub 0001 - E.164 010 - national
intl-pub 0001 001 - international
locl-pub 0001 100 - local/subscriber
pub-unk 0001 000 - unknown
lev0-pvt 1001 - PNP 100 - local
lev1-pvt 1001 010 - Regional Level 1
lev2-pvt 1001 001 - Regional Level 2
unk-unk 0 -unknown 000 - unknown
LAR - Look Ahead RoutingThe routing algorithm can be set here.

Numbering Format	NPID	Type of Number
blank	unmodified	unmodified
natl-pub	0001 - E.164	010 - national
intl-pub	0001	001 - international
locl-pub	0001	100 - local/subscriber
pub-unk	0001	000 - unknown
lev0-pvt	1001 - PNP	100 - local
lev1-pvt	1001	010 - Regional Level 1
lev2-pvt	1001	001 - Regional Level 2
unk-unk	0 -unknown	000 - unknown

next - the next FRL and new call
retu - the same FRL, other trunk, new call
none - LAR is switched off