AXD / Felhasználói Programok

MSSN - Usage of the data administration and diagnostic programs (WinxP)

Dear College!

Welcome to the AxD 305 MSS!

Connecting to MSS:

Management terminal (MT) of the MSSs is work station of the computer network of the laboratory (PC WinxP), which was configured for this purpose, too. MT joins through a management IP network in the SUN workstations (op. system: Solaris) of the individual MSSs and through these in the CPs of the MSSs. Management network is deployed in the laboratory further mounting is not needed. The user interface of MSS (i.e. the AMS) is a WEB interface.

Logging in to MSSs

1. Switch on the MT PC (WinxP)! Ask the teacher for login name and password if needed!

2. The following table summarizes the necessary parameters for the connecting:

Room
(Laboratory) MSS Number;
Config Id. MSS Appl. MT window icon MT window ID AxD host name session id. MT http address
B.212 1; 036 ML, MGWIC AXD1 Xming:0.0 axd1.tmit.bme.hu gnome-session 10.0.1.2:8002 if CP1 is active
10.0.1.3 if CP1-19 is active
B.211 2; 030 MGW, CE AXD2 Xming:1.0 axd2.tmit.bme.hu gnome-session 10.0.1.2:8002 if CP1 is active
10.0.1.3 if CP1-19 is active
B.213 3; 037 MGW, CE AXD3 Xming:2.0 axd3.tmit.bme.hu gnome-session 10.0.1.2:8002 if CP1 is active
10.0.1.3 if CP1-19 is active

Room (Laboratory)	MSS Number; Config Id.	MSS Appl.	MT window icon	MT window ID	AxD host name	session id.	MT http address
B.212	1; 036	ML, MGWIC	AXD1	Xming:0.0	axd1.tmit.bme.hu	gnome-session	10.0.1.2:8002 if CP1 is active 10.0.1.3 if CP1-19 is active
B.211	2; 030	MGW, CE	AXD2	Xming:1.0	axd2.tmit.bme.hu	gnome-session	10.0.1.2:8002 if CP1 is active 10.0.1.3 if CP1-19 is active
B.213	3; 037	MGW, CE	AXD3	Xming:2.0	axd3.tmit.bme.hu	gnome-session	10.0.1.2:8002 if CP1 is active 10.0.1.3 if CP1-19 is active

Check if the icons of the WEB user interface terminal window of the AXDs and the icon of the "putty" terminal emulator program used for the contact are on the desktop?

3. Open the WEB user interface terminal window of the selected AXD! The window is still empty.
4. Create a connection with the "putty" terminal emulator program to the selected AXD using the following parameters: AxD host name, login name, password, session id! You can ask teacher for login name and password.

Starting management, configuration, and control programs

After login please start the programs according to the following table:

Room
(Laboratory) MSS Number;
Config Id. MSS Appl. MT window icon MT window ID AxD host name in xxAxe Management and
control program MT http address
B.212 1; 036 ML, MGWIC AXD1 Xming:0.0 bme3 WEB Browser (AMS), xxAxe, Consol Service 10.0.1.2:8002 if CP1 is active
10.0.1.3 if CP1-19 is active
B.211 2; 030 MGW, CE AXD2 Xming:1.0 bme2 WEB Browser (AMS), opensocket, Consol Service 10.0.1.2:8002 if CP1 is active
10.0.1.3 if CP1-19 is active
B.213 3; 037 MGW, CE AXD3 Xming:2.0 bme1 WEB Browser (AMS), opensocket, Consol Service 10.0.1.2:8002 if CP1 is active
10.0.1.3 if CP1-19 is active

Room (Laboratory)	MSS Number; Config Id.	MSS Appl.	MT window icon	MT window ID	AxD host name in xxAxe	Management and control program	MT http address
B.212	1; 036	ML, MGWIC	AXD1	Xming:0.0	bme3	WEB Browser (AMS), xxAxe, Consol Service	10.0.1.2:8002 if CP1 is active 10.0.1.3 if CP1-19 is active
B.211	2; 030	MGW, CE	AXD2	Xming:1.0	bme2	WEB Browser (AMS), opensocket, Consol Service	10.0.1.2:8002 if CP1 is active 10.0.1.3 if CP1-19 is active
B.213	3; 037	MGW, CE	AXD3	Xming:2.0	bme1	WEB Browser (AMS), opensocket, Consol Service	10.0.1.2:8002 if CP1 is active 10.0.1.3 if CP1-19 is active

Starting of the AMS AxD managemnet program:

5. After contacting the user interface terminal window is not empty, at the bottom in status bar we can find the icon of the web browser. Start this program and after a while we will see the intro page of the AMS (AXD 301 Management System).
It may fail first time if the default http address is not the address of the active CP. In this case use the other http address given in the table.
6. Last step is the login to the AMS. You can ask teacher for login name and password.
7. Finally, the root menu of the AXD appears in terminal window and we can start to work.
8. The user interfaces of the remainig ADXs can be opened by repeating steps 3-6.
9. If the user interface is not used it will be locked after 10 minutes inactivity. We can unlock this screen-saver with the password used for the contacting.

Root menu of the AMS, studying and editing data blocks (database records):

To help the starting we listed the most important menus of the WEB user interface:
- Equipment - Hardware configuration of ETs, SCs, CPs (i.e. EMs)
- IP Services (IP network level service)
- Permanent Connections - PVC creation in the SC
- Switch Fabric - Configuration of the SC (Switch Core) ATM switching network (Circuit Emulation, Link)
- Voice - Programming Voice & Telephony Services application.
Menu types: Create.., Open .., Miscellaneous
Detailed description of the menus of the user interface and the manufacturer documents of the AxD are available only in the laboratory. Copying these documents is strictly forbidden!

Saving the screen content to a file

If we want to use the screen content in the report we can save it to the clipboard Printscreen button. This picture can be edited and saved to file with the Start/Accessories/Paint program (suggested format: gif).

Exit from the program

Pressing the "Logout" button in the root menu.

When finishing the programming, please close terminal window.